The Modular loading dock system has an impressive
track record of success that provides a fast and effective
solution for the creation of a raised dock area - this being
achieved with the minimum of disruption and without the necessity
of building works.
The modular dock system is as permanent as required and
has flexibility to be configured into virtually any layout
shape by combining the bolt-together platform modules that
are available in ten different standard sizes. Equally, there
is no limit to the area that can be constructed. Two load
capacities are available to accommodate either pallet truck
or fork lift operation.
The system is further enhanced with a comprehensive range
of 'built-in' dock levellers with all necessary access and
safety equipment. Where necessary, special components can
be made to order.
In addition, our design means that if you want to move the
modular dock or expand/contract it due to changing needs,
the task is simple.
Photos
courtesy of Baco Metals
Examples of an actual Chase Modular Dock installation
in action.
VERSATILE MODULES THAT SIMPLY BOLT TOGETHER AND AVOID
THE PERMANENCY OF CONCRETE.
1 Straight
or L-shaped access ramps 3 Standard
module types 5 Dock Levellers
2 Access
steps and ladder 4 Hand
rails and truck raves
Note: modules can be taylored to suit, both in size
and shape.
Specification
and Features
Construction
of platform modules
Rated load
capacity
Standard platform
module sizes
(available in either capacity)
Load transfer
to ground
Accessory components
General assembly
Finish
Design and
manufacture
All steel fully welded with Durbar plate surface.
Heavy range
Light range
- 10,000kg. for typical container loading
forks
- 3,000 kg for typical power pallet trucks
Model No.
M1
M2
M3
M4
M5
Size mm
3570x2380
2380x2380
3570x1190
2380x1190
1190x1190
Model No.
M6
M7
M8
M9
M10
Size mm
3570x595
2380x1785
3570x1785
2975x2380
2380x595
Via 4 No. 150mm x 150mm corner
pads per platform module.
Handrails, safety rails and
access equipment of all steel construction and fully
welded.
Platform modules and accessory
components are bolted together with high tensile M16
bolts.
Fabricated platform modules
and accessory components are finished in a high specification
industrial paint which incorporates advanced rust inhibitors.
Fixings are bright zinc finished.
The system is wholly designed
and manufactured by Chase Equipment Limited.
Contact Chase Equipment NOW to discuss YOUR specific loading dock requirement.
Whatever your loading challenge is, Chase will make your business loads easier.
