Edge of Dock Leveller
Edge of Dock Levellers are a safe and economical alternative to loose bridging plates and inbuilt electro- Hydraulic units, the Chase Edge of Dock Leveller solves the many problems Associated with vehicle loading.
Unobtrusive yet extremely effective, the spring-assisted design, incorporating a hinged lip, is adaptable for many locations and can be installed in a fraction of the time of conventional pit-mounted levellers. Limited space,no pit.
Suitable for all traffic types from roll cages to fork lift trucks, the Chase Edge of Dock Leveller is an option to vehicle loading efficiency. The vehicle is brought into operation after a vehicle has docked squarely and centrally against the buffers. Housed in a sleeve, mounted between the lip plate and buffer, the operating lever is lifted and pulled rearward. This action causes the lip to rise above the vehicle bed, allowing the lever to move forward and will enable the lip plate to extend and rest on the vehicle bed. Parking is affected before the vehicle departs by extending and pulling back on the lever to automatically disengage the cam mechanism.
Features of the Chase edge of dock leveller include:
- Capacity 9,000 kg roll over load
- Surface: Steel chequer plate with chamfered lip edge for smooth transition.
- Buffers: 102mm x 305mm x 330mm
- Lip extends to 317mm beyond bumper face.
- Maintenance is limited to occasional lubrication of hinge tubes.
- Quick to position with minimal effort.
- Can be engaged or parked with vehicle in docked position.
- Will accommodate vehicles with bed heights that are within plus or minus 100 mm of loading bank.
Contact Chase Equipment NOW to discuss YOUR specific dock leveller requirement
Whatever your loading challenge is, Chase will make your business loads easier. Electric conversions.